Call us:  03 9706 9767


Travertine French Pattern

Read More about Bluestone Pavers – Learning Center

CALL US TODAY! Order Your FREE SAMPLE – Express Posted 

Travertine French Pattern Tiles


Travertine French pattern tiles are used for interior and exterior home décor applications. They are an ideal option for homeowners who are looking for a bold and elegant look for their home. Commonly called as Roman Pattern, travertine French pattern tiles are different from the standard square tiles. What sets these unique stones apart from the standard natural stone is the way they are arranged. Each set comes with a pack of 12 tile pieces.

These pieces can cover up to 16 square foot area seamlessly. However, we recommend you purchase a few extra pieces to cover a large area. For instance, if you are planning to install the travertine French pattern tiles on your patio or driveway, you may need more than 12 standard pieces.


Ivory Rustic Travertine Drop Face Pool Coping pavers beige paving cream pavers light pavers


There is no denying travertine is one of the most popular natural stones on the home decor market. Its durability and resilience are the two main properties that make it an ideal option for all interior and exterior décor applications.

Travertine stones can be laid in different ways. French pattern pavers remind us of the historic European places. They look quite similar to the traditional flooring. However, travertine French pattern tiles give your floor a contemporary touch. They look quite impressive and elegant both indoors and outdoors.

This leads us to an important question “how are travertine French pattern tiles need to be laid”? Let’s find out.

How to lay travertine French pattern tiles? DIY Steps

#STEP 1 – Measure the Space

The first step to laying the French pattern travertine tiles is finding out the total tiles you are going to need. For that, you need to measure the total space by multiplying the length of the area with width. If you are planning to install these pavers in an open area, where it seems difficult to measure the dimensions of the space, then divide the area into multiple squares and then calculate the total of these squares.

You need to get the total area in square feet to find out the exact number of tiles required. To do that, multiply the length and width in inches and divide the result by 144. There you go! You will get the total area in square feet.

#STEP 2 – Purchase the Pavers and Other Materials

Buy travertine French pattern tiles (make sure you purchase a few extra slabs so that you will have enough tiles to cover the whole area). Before you make a purchase, check and compare the colors and designs of the travertine tiles. Other materials you will need for an accurate installation are as follows:

  • Trowel
  • Backerboard
  • Grout
  • Tile saw
  • Mixing paddle
  • Thinset
  • A grout sponge
  • Drill
  • Natural stone sealant
  • Knife
  • Bucket (up to 5-gallon)
  • Chalk like

Assemble all these items. You will find them in any local retail store. If you don’t want to attempt the DIY installation, hire a professional contractor that specialises in French pattern travertine layout. If you are doing it on your own, check the next step.

#STEP 3 – Clean the Space

It is important to clean the area thoroughly before the installation. Any dirt, dust, grime, and filth could impact the installation. Make sure that the cleaner the area is, the better the travertine tiles will adhere to the floor. You could clean the space using a chemical detergent or warm water. Let the space dry before building the foundation. You could wait for 1-2 hours.

#STEP 4 – Build the Cement Bed

You will need to build a strong foundation to lay the travertine tiles. You can use the cement board if you are trying DIY installation. The base needs to be properly set up before you start to layout the travertine tiles.

#STEP 5 – Apply Thinset

Get the 5-gallon bucket and mix the thinset according to the instructions mentioned on its package. Grab the trowel and spread it evenly throughout the space. Remember that the thinset needs at least 24 hours to dry. So, leave it for one day so that the material gets dried. Once it looks dry, start to layout the travertine tiles.

#STEP 6 – Install the Pavers

Laying out the travertine French-style patterns can be a little challenging. You could use a chalk-like to draw the lines. That’s it! You can calculate the space and cut your travertine tiles accordingly so that it fits the space.

#STEP 7 – Seal the Area

Sealing the area is important after the installation. You may need to seal the space every once in a while. The travertine tiles can endure stains, scratches, and weather elements if the area is sealed. Not only travertine, but all types of natural stones need proper sealing after the installation. It extends their lifespan and makes them more durable and versatile.

Purchase a high-quality sealant from a local hardware store. Make sure you wait for at least 24 hours before applying the sealant. The floor needs to be dried properly before it is sealed. You could hire a professional for sealing the floor or do it on your own. Either way, sealing is an integral part of the travertine French pattern tile installation. So, make sure you seal the area.

Travertine French pattern


Noce travertine French pattern pavers outdoor pavers beige paving brown paving


Using four different sized travertine pavers creates a french pattern, The biggest advantage when using french pattern is its versatility in design, its ability to work within almost any space, and the character and beauty. The travertine pavers come in four different sizes to make up the french pattern, all pavers are 12mm thick. They are the 3 different sizes used in french pattern.

  • 400x400x12mm
  • 600x400x12mm
  • 200x400x12mm

They are the 3 different sizes used in french pattern.


Contact Outdoor Tiles Melbourne Today to get the best offer on your Travertine Tiles order.


Looking for travertine tiles Melbourne suppliers in Australia? We are Australia’s largest travertine tiles and travertine paving suppliers in Victoria, Sydney, Brisbane, Canberra and Adelaide. Give us a call today on 03 9706 9767 or visit our showroom located in Melbourne.

Want to know more information about travertine tiles and pavers? Check out our recent blogs.

Order Your Free Samples Today OpenClose

Order now >> You have chosen 0 out of 4 free samples